Content Comparison

http://<<ip address>>/rest/controller/«controllerno»/tag/

PUT

Sets value and color on a range of tags.

controllerno is a number

[
  {
    "tagid": «tagid»,
    "value": «valuetodisplay»,
    ["color": "red|green|orange|blue|pink|cyan|none"],
    ["blinking": "on|blinkoff|blink2sec|blink1sec|blink05sec|blink025sec"]
  },
  ...
]

value should be a string, when set to null the tag is switched off (v2.1.2+).

color is optional. When no color is chosen, it defaults to red.

blinking should be a string, blink is an alias for blink1sec. It it defaults to on(i.e. no blinking).

HTTP204 when successful

HTTP400 when request was invalid

{
  "message": «human readable error»
}

HTTP404 with no body when controller does not exist

HTTP409 when cabinet not in correct mode

Note when the cabinet sides setting is set to frontonly, controller 2 will not be available and this will result in an HTTP404.

v2.3.0:

• Blinking support added.

v2.1.2:

• Tags are no longer switched off before setting the tag range. (You can handle the switching off of tags by yourself, using the cabinet/lightest call. When used with off, this switches off all lights).

v2.1.1:

• All tags are switched off before the range is set, this means sending [] causes all tags to be switched off.

v2.1.0:

• Tag range call added